Rostock MAX v2 Assembly Guide – 4thEd.
8.5 – Installing the Upper Idler Bearings
For this task, you'll need the following components.
The first thing you'll need to do is insert an R4 bearing into each one of the idler bearing
sleeves.
Now hold two idler bearing spacers on to the bearing as
shown and slip the whole thing into the upper tower mount as
shown.
Using your thumb and forefinger, hold the idler assembly
in place as you insert a 1.75” Pan head screw in from the side.
Attach a #6-32 nylon lock nut on the
screw, finger tight and then install the other two
idlers the same way.
8 – Assembling, Installing, and Wiring the Top Section – 73
Fig. 8.5-1: Assembled bearing sleeves.
Fig. 8.5-2: Positioning the idler
assembly.
Fig. 8.5-3: Idler installed!
