Rostock MAX v2 Assembly Guide – 4thEd.
1 – Required Tools And Materials
Before you begin assembly of your Rostock MAX v2, please make sure you’ve got everything
on the following list of tools and additional materials.
Tools
•
P1 & P2 sized Phillips screwdrivers
•
Standard flat head screwdriver
•
A small flat head screwdriver.
•
3/32” Allen (hex) wrench. A ball-end, T-handle version is a good choice for this and the other
sizes of Allen wrenches used
•
5/32” Allen (hex) wrench.
•
7/64” Allen (hex) wrench.
•
Needle nose pliers
•
Slip joint pliers
•
Forceps – these will come in handy when routing the belts and reaching for small, hard to reach
parts. They can be purchased from Amazon for as little as $3.50 for a set of two.
•
Wire strippers
•
Wire cutters (flush cut type)
•
Wire crimping tool, similar to the one below. Used for crimping power supply wiring.
1 – Required Tools And Materials – 6
