Rostock MAX v2 Assembly Guide – 4thEd.
3.2 – Preparing the Power Supply
For this task, you'll need these components:
Your Rostock MAX v2 uses a 12 volt, 29 amp industrial power supply to provide power to the
RAMBo controller, the Onyx heated bed and the hot-end. The power supply won't be installed until a
later step, but there's some prep work that you can do now.
The very first thing you need to do is verify that the
power supply is configured for the voltage source in your
country. In the USA/Canada, it's 115v. In Europe and other
countries, it's likely 230v. If you don't know, ask.
3 – Preparing the Hot End and Power Supply – 33