Rostock MAX v2 Assembly Guide – 4thEd.
8.4 – Installing the Upper Tower Mounting Hardware
For this task, you'll need the following components:
Install four ¼-20 button head screws and four T-Slot nut plates into each upper tower support as
shown in Fig. 7-17.
Thread the nut plates only a couple of turns – they need to be as loose as the lower ones were in
order to properly fit the towers.
8 – Assembling, Installing, and Wiring the Top Section – 72
Fig. 8.4-1: Screws & nut plates
installed.
Fig. 8.4-2: Offset view.
