3-24
1)
2)
3)
4)
5
Tube
Disconnect the tube from the Dumper and then,
evacuate all ink from the Sub Tank using the syringe
according to the following procedures.
Connect the syringe to the tube and pull the piston.
Funnel
Disconnect the syringe from the tube and drain the
ink to the drain bottle through the Funnel.
With the special tool (TOOL, SYRINGE 20ML
ST-064), it necessary to 6 or 7 times to
evacuate all the ink.
Repeat the procedure 1) and 2) until the Sub Tank
becomes squashed.
<View from the side>
Sub Tan
k
When the Sub Tank becomes squashed, do not
disconnect the syringe and keep the piston pulled
by a hexagon wrench or the like to prevent the ink
from going back.
Hexagon
Wrench
Use the following special tool.
Tool NO.: 1000001400
Tool Name: TOOL, SYRINGE 20ML ST-064
Special Tool
Summary of Contents for Advanced Jet AJ-1000
