5-5
5-2 HOW TO REMOVE THE AIR IN THE INK LINE
Perform Normal, Powerful, Manual Cleaning
but air still remains in the ink line.
Yes
No
Check if Adapter Screw is tightened up firmly by hand.
There are 30 checking points.
12 are Adapter Screws for Supply Pumps.
12 are Adapter Screws for Pressure Pumps.
6 are Adapter Screws for Heads.
After checking, some Adapter Screws are not tightened up.
No (Not Tightened up)
Tighten up Adapter Screws firmly by hand.
Prepare the tissue or the waste of cloth.
Patch the tissue or the waste cloth with the joint parts fixed by
Adapter Screws again.
There are 30 checking points totally.
12 Adapter Screws for Supply Pumps.
12 Adapter Screws for Pressure Pumps.
6 Adapter Screws for Heads.
After checking, the ink is put on the tissue or the strip of cloth.
Yes
Yes (Tightened up)
Does the ink put on the joint parts fixed by
Adapter Screws at Head ?
No
Does the ink put on the joint parts fixed by
Adapter Screws at Pressure Pump?
No
Does the ink put on the joint parts fixed by
Adapter Screws at Supply Pump?
No
Yes
Yes
Yes
Did you replace O Ring at Head or Pressure
Pump?
Is there air in Ink Tube between Head and
Pressure Pump or in Pressure Pump?
Yes
No
Did you replace O Ring at Head?
Is there air in Ink Tube between Head and
Supply Pump or in Supply Pump?
Yes
No
No
1. How To Check The Break Of
O Ring And Fixing Of Adapter
Screws.
2. How To Replace O Ring
(Head Part)
3. How To Replace O Ring
(Pressure Pump Part)
4. How To Replace O Ring
(Supply Pump Part)
5. How To Remove Air In Ink Tube Between
Head And Pressure Pump Or In Pressure
Pump.
6. How To Remove Air In Supply Pump Or
Ink Tube Between Supply Pump And Sub
Tank.
Summary of Contents for Advanced Jet AJ-1000
