manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 219 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 219

5-12

7

Prepare new O Ring and put it to the top of Tube Joint

Adapter.

4

Select  [I/S MENU] > [I/S CONTROL] > [PRESS PUMP 1- 6] >

[CLOSE] and press [ENTER] key.

5

Loosen Adapter Screw and disconnect Ink Tube from Head.

SERVICE MENU

I/S MENU

I/S MENU

I/S CONTROL

I/S CONTROL

PRESS PUMP1

[ENTER] 

PRESS PUMP1

CLOSE

[      ]  [      ] 

[      ]  [      ] 

This prodcedure is to prevent the ink from

flowing back to Sub Tank when disconnecting

the tube from Head.

6

Remove O Ring from Tube Joint Adapter.

Do not strech O Ring when putting it to Tube

Joint Adapter.

Adapter Screw

Do not remove Tube Joint Adapter from Ink Tube.

O Ring

Tube Joint Adapter

O Ring

Tube Joint Adapter

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments