3-15
10
8
11
Hook projection part of the Cap Frame to the base and fix
the Cap Frame by the screw on the other side.
Fix the Cap Case Holder by fitting the Pins on the Cap
Case Holder with the Springs on the Cap Top.
After fixing the Cap Case Holder, check that
Springs push back the Cap Case Holder by
pressing it lightly.
Fix Springs on "+" Mark on the rear side of the new Cap
Top.
Do not touch the sponge part on the top side of
Cap Top.
Pin
"+" Mark
Cap Top
Spring
9
When setting the Cap Top to the Cap Frame, be careful
about the fixing direction. Fix the Cap Top to the Cap
Frame by fitting the side of Tube on Cap Top with the side
of the hole on the Cap Frame.
Pin
Cap Case Holder
Spring
Hole
Tube
Cap Top
Cap
Frame
Projection
Part
Cap Frame
Screw
Summary of Contents for Advanced Jet AJ-1000
