manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 269 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 269

7-17

[     ] 

[     ] 

SERVICE MENU

I/S MENU

I/S MENU

I/S CONTROL

I/S CONTROL

WIPER

[ENTER] 

WIPER

UP

[     ] 

[     ] 

3) Select 

[I/S MENU] > [I/S CONTROL] > [WIPER] >

    [UP]

, and press the [ENTER] key. The WIPERs

    move up.

4) 

Select [I/S MENU] > [I/S CONTROL] > [SLIDER] >

       [REAR]

, and press the [ENTER] key.  The WIPER

     UNIT moves back.

5) Remove the screws shown in the figure and pull out

    the tray.

[     ] 

[     ] 

SERVICE MENU

I/S MENU

I/S MENU

I/S CONTROL

I/S CONTROL

SLIDER

[ENTER] 

SLIDER

REAR

[     ] 

[     ] 

[     ] 

Screw

Tray

6) Tilt the tray to pour out the maintenance liquid to the

    location shown in the figure.

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments