3-55
7
9
8
10
Remove the Flexible Cable from the HEAD 2 and HEAD
3.
Flexible Cable
Remove the 2 screws fixing the Belt Holder to the Head
Carriage. And, move the Head Carriage to the left so as
to see the connected part of the belt.
Screw
Loosen the 2 screws shown in the figure and then loosen
the Adjustment Screw.
Adjustment Screw
Remove the Belt Holder from the Carriage.
Do not scratch the encoder scale when you
replace the Belt Holder from the carriage.
It is recommended for working easily and safely
to remove the encoder/encoder scale when it is
difficult to remove and move the Belt Holder.
Loosen the 4 screws shown in the figure and then
remove the Carriage Belt.
Belt Holder
Belt Holder
Plate
Summary of Contents for Advanced Jet AJ-1000
