manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 157 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 157

4-10

Contents of History Report

MOTOR GROUP

Item

Contents

Unit

Reference

MOTOR HOURS F

Total time that the Feed Motor has been rotated.

hours

MOTOR HOURS S

Total time that the Scan Motor has been rotated.

hours

Life : 1500 hours

PRESS PUMP 1

Total time that the Press Pump 1 has been rotated.

times

Life : 7000K times

PRESS PUMP 2

Total time that the Press Pump 2 has been rotated.

times

Life : 7000K times

PRESS PUMP 3

Total time that the Press Pump 3 has been rotated.

times

Life : 7000K times

PRESS PUMP 4

Total time that the Press Pump 4 has been rotated.

times

Life : 7000K times

PRESS PUMP 5

Total time that the Press Pump 5 has been rotated.

times

Life : 7000K times

PRESS PUMP 6

Total time that the Press Pump 6 has been rotated.

times

Life : 7000K times

SUPPLY PUMP 1

Total time that the Supply Pump 1 has been rotated.

times

Life : 7000K times

SUPPLY PUMP 2

Total time that the Supply Pump 2 has been rotated.

times

Life : 7000K times

SUPPLY PUMP 3

Total time that the Supply Pump 3 has been rotated.

times

Life : 7000K times

SUPPLY PUMP 4

Total time that the Supply Pump 4 has been rotated.

times

Life : 7000K times

SUPPLY PUMP 5

Total time that the Supply Pump 5 has been rotated.

times

Life : 7000K times

SUPPLY PUMP 6

Total time that the Supply Pump 6 has been rotated.

times

Life : 7000K times

M-LIQUID PUMP

Total time that the Maintenance Liquid Pump has been rotated.

times

Life : 7000K times

CLEAR ALL

Clear all the value in the Motor Group.

HEAD GROUP

Item

Contents

Unit

Reference

SHOT COUNT 1

Number of shots fired from the nozzle (H1).

Shots/1000 Life : 4 billion Shots / nozzle

SHOT COUNT 2

Number of shots fired from the nozzle (H2).

Shots/1000 Life : 4 billion Shots / nozzle

SHOT COUNT 3

Number of shots fired from the nozzle (H3).

Shots/1000 Life : 4 billion Shots / nozzle

SHOT COUNT 4

Number of shots fired from the nozzle (H4).

Shots/1000 Life : 4 billion Shots / nozzle

SHOT COUNT 5

Number of shots fired from the nozzle (H5).

Shots/1000 Life : 4 billion Shots / nozzle

SHOT COUNT 6

Number of shots fired from the nozzle (H6).

Shots/1000 Life : 4 billion Shots / nozzle

WIPE H1

Number of times the Wiping has been performed (H1).

times

Life : 3000 times

WIPE H2

Number of times the Wiping has been performed (H2).

times

Life : 3000 times

WIPE H3

Number of times the Wiping has been performed (H3).

times

Life : 3000 times

WIPE H4

Number of times the Wiping has been performed (H4).

times

Life : 3000 times

WIPE H5

Number of times the Wiping has been performed (H5).

times

Life : 3000 times

WIPE H6

Number of times the Wiping has been performed (H6).

times

Life : 3000 times

NORMAL CL. H1

Number of times the Normal Head Cleaning has been performed (H1).

times

NORMAL CL. H2

Number of times the Normal Head Cleaning has been performed (H2).

times

NORMAL CL. H3

Number of times the Normal Head Cleaning has been performed (H3).

times

NORMAL CL. H4

Number of times the Normal Head Cleaning has been performed (H4).

times

NORMAL CL. H5

Number of times the Normal Head Cleaning has been performed (H5).

times

NORMAL CL. H6

Number of times the Normal Head Cleaning has been performed (H6).

times

POWERFUL CL.H1

Number of times the Powerful Head Cleaning has been performed (H1).

times

POWERFUL CL.H2

Number of times the Powerful Head Cleaning has been performed (H2).

times

POWERFUL CL.H3

Number of times the Powerful Head Cleaning has been performed (H3).

times

POWERFUL CL.H4

Number of times the Powerful Head Cleaning has been performed (H4).

times

POWERFUL CL.H5

Number of times the Powerful Head Cleaning has been performed (H5).

times

POWERFUL CL.H6

Number of times the Powerful Head Cleaning has been performed (H6).

times

POWER ON CL.H1

Number of times the Power On Head Cleaning has been performed (H1).

times

POWER ON CL.H2

Number of times the Power On Head Cleaning has been performed (H2).

times

POWER ON CL.H3

Number of times the Power On Head Cleaning has been performed (H3).

times

POWER ON CL.H4

Number of times the Power On Head Cleaning has been performed (H4).

times

POWER ON CL.H5

Number of times the Power On Head Cleaning has been performed (H5).

times

POWER ON CL.H6

Number of times the Power On Head Cleaning has been performed (H6).

times

PERIODIC CL.H1

Number of times the Periodic Head Cleaning has been performed (H1).

times

PERIODIC CL.H2

Number of times the Periodic Head Cleaning has been performed (H2).

times

PERIODIC CL.H3

Number of times the Periodic Head Cleaning has been performed (H3).

times

PERIODIC CL.H4

Number of times the Periodic Head Cleaning has been performed (H4).

times

PERIODIC CL.H5

Number of times the Periodic Head Cleaning has been performed (H5).

times

PERIODIC CL.H6

Number of times the Periodic Head Cleaning has been performed (H6).

times

PRE-PRNT.CL.H1

Number of times the Pre-Print Head Cleaning has been performed (H1).

times

PRE-PRNT.CL.H2

Number of times the Pre-Print Head Cleaning has been performed (H2).

times

PRE-PRNT.CL.H3

Number of times the Pre-Print Head Cleaning has been performed (H3).

times

PRE-PRNT.CL.H4

Number of times the Pre-Print Head Cleaning has been performed (H4).

times

PRE-PRNT.CL.H5

Number of times the Pre-Print Head Cleaning has been performed (H5).

times

PRE-PRNT.CL.H6

Number of times the Pre-Print Head Cleaning has been performed (H6).

times

SELF CL. H1

Number of times the Self Head Cleaning has been performed (H1).

times

SELF CL. H2

Number of times the Self Head Cleaning has been performed (H2).

times

SELF CL. H3

Number of times the Self Head Cleaning has been performed (H3).

times

SELF CL. H4

Number of times the Self Head Cleaning has been performed (H4).

times

SELF CL. H5

Number of times the Self Head Cleaning has been performed (H5).

times

SELF CL. H6

Number of times the Self Head Cleaning has been performed (H6).

times

FILL INK H1

Number of times the Fill Ink has been performed (H1).

times

FILL INK H2

Number of times the Fill Ink has been performed (H2).

times

FILL INK H3

Number of times the Fill Ink has been performed (H3).

times

FILL INK H4

Number of times the Fill Ink has been performed (H4).

times

FILL INK H5

Number of times the Fill Ink has been performed (H5).

times

FILL INK H6

Number of times the Fill Ink has been performed (H6).

times

HEAD WASH H1

Number of times the Head Wash has been performed (H1).

times

HEAD WASH H2

Number of times the Head Wash has been performed (H2).

times

HEAD WASH H3

Number of times the Head Wash has been performed (H3).

times

HEAD WASH H4

Number of times the Head Wash has been performed (H4).

times

HEAD WASH H5

Number of times the Head Wash has been performed (H5).

times

HEAD WASH H6

Number of times the Head Wash has been performed (H6).

times

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments