4-34
10
If the voltage is less than 0.5V, increase the voltage for 0.1V
in [OUTPUT LEVEL] menu and carry out [SENSOR
AUTOTEST] for checking.
If the voltage is more than 1.0V, decrease the voltage for
0.1V in [OUTPUT LEVEL] menu and carry out [SENSOR
AUTOTEST] for checking.
If the NOISE is more than 0, try the followings.
1. Clean Reflection Tape.
2. Replace Reflection Tape if there are many scratches
on it.
Select [PAPERSIDE SENS] > [SENSOR AUTOTEST] and
ress [ENTER] key.
Carry out the test and make sure the voltage is 0.5-1.0V and
the NOISE is 0.
9
8
Adjust VR on the CARRIAGE BOARD so that [OUTPUT
LEVEL] will be 0.5-0.7V.
[ ]
[ ]
[ENTER]
SUB MENU
PAPERSIDE SENS
PAPERSIDE SENS
OUTPUT LEVEL
PAPERSIDE SENS
SENSOR AUTOTEST
SENSOR AUTOTEST
0.5V NOISE 0
Summary of Contents for Advanced Jet AJ-1000
