manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 263 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 263

7-11

Operation

Switching the power on and off

This machine has five power switches.

When you finish printing, you turn off

switches 3 and 4 as required.

Raise the pinch rollers when printing is not being performed. If you keep them set down for a long time, they will

be deformed.

Settings of the Media Heating System

-Operation of the Preheater, Print heater and Dryer (drying heater and blower fan)

-Making the temperature setting

-General guide for the preset temperatures

!! IMPORTANT !!

- The platen and dryer become hot. Exercise caution to avoid fire or burns.

- Remove any loaded media or switch off the sub power when printing is not being performed.

- Never use media that cannot withstand the heat of the media heating system.

- Never use the platen or dryer for any purpose for which they are not intended, such as to dry clothing.

Explain following items in reference to the User's Manual.

Starting printing

Pausing or canceling printing

Shifting the print-start position to the desired position

Main power switch
for the dryer

Main power switch
for the printer

Back side of the machine

Sub power switch
for the printer

Power switches for
the media take-up
and feed systems

1

3

4

2

!! IMPORTANT !!

- Make sure to use the Sub power switch of the printer for the daily powering on and off. If the Main power

switch of the printer is off, the automatic cleaning will not operate and it will cause the heads to be

broken.

(The automatic cleaning will operate even if the sleep mode is disabled as long as the Sub power switch

is on.)

- When printing is not being performed, remove the loaded media or switch off the Sub power of the

printer. The continued application of heat at a single location may cause the release of toxic gases from

the media or pose a fire hazard.

- If the power switches for the media take-up and feed systems are kept on, the take-up and feed systems

may operate by moving the dancer roller.

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments