manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 261 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 261

7-9

Setting up the

Network

Installing Roland

VersaWorks

Setting up the printer

Enter the IP Address (e.g. 192.168.0.101) and the Subnet mask (e.g. 255.255.255.0)

System requirements for installing the software

Making the setting for Roland@NET

Select a check box [Download Updates Automatically and Notify] if the customer accepts it.

IP address of the PC

IP address of the Priner

Filling Ink

Connecting the Cables

Connecting the Power Cord

Connecting the Ethernet cable (suggested 100Base-TX) to the Computer (Network)

*Make sure to use the Ethernet cable which is category 5 and above.

!! IMPORTANT !!

Connect  the two power cords to outlets on separate systems.

Fix the Ink Cartridge and fill Ink. Refer to the Setup guide [5. Installing the Ink Cartridges].

Setting up the PC

Enter the IP Address (e.g. 192.168.0.100) and the Subnet Mask (e.g. 255.255.255.0).

Setting up the network in reference to the "Roland-PrintServer Network Setup Guide".

Install the Roland VersaWorks in reference to the Quick Start Guide.

Operating system :       Windows XP Service Pack 1 or later, Windows 2000 Service Pack 4

CPU :                            Pentium 4 2.0GHz or faster

Memory (RAM) :            512MB and above (1GB or more recommended)

Monitor :                         High-resolution SXGA (1,280 x 1,024 pixels) or better display recommended

Free hard-disk space required for installation :                100MB

Free hard-disk space required as a working space :        1GB or more recommended

!! IMPORTANT !!

Keep the removed dummy cartridges from being discarded

for future use.

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments