manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 265 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 265

7-13

Cleaning function of the head (Normal cleaning / Powerful cleaning)

- Selected Head(s)

- All Heads

Cleaning the printing heads using the cleaning kit

Replacing the wipers

!! IMPORTANT !!

Never use gasoline, alcohol, thinner, or any other flammable materials.

!! IMPORTANT !!

- When you dispose of the discharged ink, make sure to go to [MENU] > [SUB MENU] > [MAINTENANCE]

> [DRAIN BOTTLE] and press the [ENTER] key to reset the discharged-ink count. Otherwise, "CHECK

DRAIN BOTTLE" message will appear at the inapproptiate timing.

- Never place discarged fluid near open flame, in the location where high temperature may occur, near

bleach or any other such oxidizing agent or explosive material.

- To store discharged fluid temporarily, place it in the included drain bottle or in a durable sealed container

such as a metal can or polyethylene tank, and cap tightly.

- Dispose of discharged fluid properly, in accordance with the laws in effect in your locate.

Maintenance

Do not perform the powerful cleaning more than necessary. It consumes lots of ink.

Explain following items in reference to the User's Manual.

Disposing of discharged ink

The message [CHECK DRAIN BOTTLE] appears when a certain amount of discharged ink collects in the

bottle.

Replacing the Maintenance Liquid Cartridge

Cleaning other parts

- Platen

- Grit rollers

- Pinch rollers

- Reflective tape

When you replace the Maintenance Liquid Cartridge, make sure to go to [MENU] > [SUB MENU] > [MAIN-

TENANCE] > [MAINTE. LIQUID] and press the [ENTER] key to reset the count of the maintenance liquid

consumption. Otherwise, "MAINTENANCE LIQUID LOW" message will appear at the inappropriate timing.

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments