manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 240 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 240

NO

CHECKING POINT

ACTION

REFERENCE

OUTLINE

14

Foreign substances

Manual Cleaning

User's Manual

Nozzle condition becomes poor due to the foreign substances stuck on
the surface of the head.

15

Run out of Maintenance
liquid

Maintenance Liquid
Cartridge Replacement

User's Manual

Cleaning the head with wiper is not performed efficiently and it cannot
remove the foreign substances stuck on the surface of the head.

16

Wiper wears out

Wiper Replacement

[3-2 WIPER
REPLACEMENT]

Cleaning the head with wiper is not performed efficiently and it cannot
remove the foreign substances stuck on the surface of the head.

17

Transformation / defect of
Cap

Cap Top Replacement

[3-3 CAP TOP
REPLACEMENT]

If the ink is not flowed down through the cap, the head cleaning cannot
be performed efficiently. As a result, the condition of head nozzle is not
improved by the head cleaning. If the head is not sealed by the cap, the
head will become dry and clogged.

18

Pump tube is clogged

Pump Replacement

[3-5 SUPPLY PUMP
REPLACEMENT]

If the ink is not delivered to the head properly, the head cleaning cannot
be performed efficiently.  As a result, the condition of head nozzle is not
improved by the head cleaning. When you leave the machine with filled
ink where the temperature is 50 degree °C and above, the ink tube in
the pump may be teared and may not recover its form again.

19

Head nozzle is clogged

Wipe the surface of the
head by a cleaning stick

Generally, we do not recommend to wipe the surface of head with a
cleaning stick. Howerver, it's worth to try cleaning before replacing the
head. Soak the cleaning stick in cleaning liquid fully, and then tap and
scrub the surface of head with it.

20

Broken Head

Head Replacement

[3-1 HEAD
REPLACEMENT]

6-2

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments