manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 230 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 230

5-23

Turn on Sub Power SW while pressing the Left, Right and
Down keys to enter Service Mode.

[MENU] key

[     ], [     ], [     ] + POWER ON

MENU

SERVICE MENU

4

5

3

Loosen Adapter Screw and disconnect the tube from Head.

Do not remove Tube Joint Adapter from Ink Tube.

Select [I/S MENU] > [I/S CONTROL] > [PRESS PUMP 1- 6] >

[CLOSE] and press [ENTER] key.

SERVICE MENU

I/S MENU

I/S MENU

I/S CONTROL

I/S CONTROL

PRESS PUMP1

[ENTER] 

PRESS PUMP1

CLOSE

[      ]  [      ] 

[      ]  [      ] 

2

Turn on 

Printer Main Power SW.

<Rear View>

Printer Main Power SW

This prodcedure is to prevent the ink from

flowing back to Sub Tank when disconnecting

the tube from Head.

Adapter Screw

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments