manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 168 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 168

4-21

[BIAS ADJUSTMENT]

Select [PRINT MENU] > [HEAD ADJUST] > [BIAS] >  [TEST

PRINT] and press [ENTER] key.

Test Pattern shown in the right figure will be printed.

By pressing Down key, the media is fed out so that you

can see the 

Test Pattern.  By pressing Up key, the

media is fed back to the printing position.

5

6

7

8

Loosen the 2 screws fixing Head in order shown in the

figure.

Turn Adjustment Screw by using 2.0mm Hexagonal
Wrench so that the lines of each color in the test pattern
will be aligned straight.

*Reference*
Position of the printing moves 1 line by turning the screw
1/4 turn.

Loosen the screws fixing Head for 1/2 turn.

If the screws are loosened too much,

adjustments could not be performed correctly.

1

2

Adjustment
Screw

[      ] 

SERVICE MENU

PRINT MENU

PRINT MENU

HEAD ADJUST

HEAD ADJUST

BIAS

[      ] 

BIAS

TEST PRINT

[      ] 

2

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments