manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 176 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 176

4-29

Select [I/S MENU]  > [CAP ADJUST] in SERVICE MENU and

press [     ] key.

3

CAPPING POSITION ADJUSTMENT is to adjust the height of Heads when they are capped.

It must be done when you remove or replace a cap or Head Carriage.

If this adjustment has not been done there is a possibility that the surface of Head is dries up.

4-5  CAPPING POSITION ADJUSTMENT

2

1

Right I/S Cover

Lower Pinch Rollers.

Make sure to unload the media when it is set on the

machine.

Then, turn on SUB POWER SW while pressing [     ],

[     ] and [     ] keys to enter SERVICE MODE.

[MENU] key

[     ], [     ], [     ] + POWER ON

MENU

SERVICE MENU

Remove Right I/S Cover

I/S MENU

CAP ADJUST

SERVICE MENU

I/S MENU

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments