manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 237 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 237

5-30

Remove the syringe from Ink Tube and drain the ink 

to the

drain bottle through the Funnel.

11

When the syringe becomes filled with the ink, select [I/S

MENU] > [I/S CONTROL] > [PRESS PUMP 1- 6] > [CLOSE]

and press [ENTER] key.

SERVICE MENU

I/S MENU

I/S MENU

I/S CONTROL

I/S CONTROL

PRESS PUMP1

[ENTER] 

PRESS PUMP1

CLOSE

[      ]  [      ] 

[      ]  [      ] 

10

12

Repeat  the step  from   7   to  11   4 or 5 times to remove
air.

When the ink in Sub Tank reaches to empty duing pulling
the ink, s

elect [I/S MENU] > [I/S CONTROL] > [SUPPLY

PUMP 1- 6] > [SUPPLY] and press [ENTER] key.  [SUPPLY]
is stopped automatically when Sub Tank becomes full.

SERVICE MENU

I/S MENU

I/S MENU

I/S CONTROL

I/S CONTROL

SUPPLY PUMP1

[ENTER] 

SUPPLY PUMP1

SUPPLY

[      ]  [      ] 

[      ]  [      ] 

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments