manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 139 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 139

3-54

3

5

[MENU] key

[     ], [     ], [     ] + POWER ON

MENU

SERVICE MENU

[     ] 

[     ] 

SERVICE MENU

I/S MENU

I/S MENU

I/S CONTROL

I/S CONTROL

HEAD UP/DOWN

[ENTER] 

HEAD UP/DOWN

OPEN

[     ] 

4

6

Turn on the Sub Power SW while pressing the Left, Right

and Down keys to enter the Service Mode.

Select [SERVICE MENU] > [I/S MENU] > [I/S

CONTROL] > [HEAD UP/DOWN] > [OPEN], and press

the [ENTER] key. The Head Carriage moves up and it

allows you to move by hand.

Move the Carriage to the left and remove the Carriage

Cover.

Carriage Cover

Turn off the Printer Main Power SW and the Dryer Main

Power SW.

Dryer Main Power SW

Printer Main Power SW

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments