manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 143 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 143

3-58

19

18

20

[      ] 

[     ] 

SERVICE MENU

I/S MENU

I/S MENU

I/S CONTROL

I/S CONTROL

HEAD UP/DOWN

[ENTER] 

HEAD UP/DOWN

CLOSE

[     ] [     ]

Select [I/S MENU] > [I/S CONTROL] > [HEAD UP/

DOWN] > [CLOSE] and then press the [ENTER] key to

cap the Head.

CLEANING

[      ]  [      ] 

CLEANING

NORMAL

NORMAL

123456

Press [CLEANING] key and then select [NORMAL].

Carry out Normal Cleaning with all Heads.

Carry out the following adjustments and setting.

1. Belt Tention Adjustment

2. Belt Position Adjustment

3. Lmit Position & Max Scan Width Initialize

4. Liner Encoder Setup

  (only when you remove the Encoder Scale or

   Encoder Module)

17

Move the Head Carriage manually to the position where

the left Frame of the Head Carriage is aligned to the left

Frame of the Cap Unit when seen from the front view.

Left Frame

of Cap Unit

Left Frame

of Head Carriage

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments