manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 170 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 170

4-23

Test Pattern shown in the right figure will be printed.

By pressing Down key, the media is fed out so that you can

see the 

Test Pattern.  By pressing Up key, the media is fed

back to the printing position.

11

[VERTICAL ADJUSTMENT]

Select [PRINT MENU] > [HEAD ADJUST] > [VERTICAL]  >

[TEST PRINT] and press [ENTER] key.

Loosen the 2 screws fixing Head in order  shown in the

figure.

Loosen the screws fixing the Head for 1/2 turn.

If the screws are loosened too much,

adjustments could not be performed correctly.

14

Turn Adjustment Screw so that the lines of each color in the
test pattern will be aligned straight to Magenta Head.

*Reference*
Position of the printing moves 1/2 line by turning
the screw 30 degrees.

Adjustment Screw

13

1

2

Magenta is set to Standard Head by default.

12

Test Pattern will be changed if another head is set

to Standard Head.

[      ] 

SERVICE MENU

PRINT MENU

PRINT MENU

HEAD ADJUST

HEAD ADJUST

VERTICAL

[      ] 

VERTICAL

TEST PRINT

[      ] 

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments