manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 277 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 277

7-25

Ink Cartridge

C a r t r i d g e - S l o t

Cover

REMOVE CARTRIDGE

SET CL-LIQUID

CLOSE SLOT COVER

WASHING HEAD...

>>>>>

Cleaning Liquid

Cartridge

Do not store or transport the

cartridge vertically.

NG

Tape

There is no need to remove the maintenance

liquid cartridge.

When the message shown in the figure is displayed,

open the Cartridge-Slot Cover and remove the ink

cartridges.

Clean the surrounding of the hole of the cartridge,

and tape the holes.

When all ink cartridges are removed, the message

shown in the figure will be displayed.

Insert the cleaning liquid cartridges.

When all cleaning liquid cartridges are inserted, the

message shown in the figure will be displayed. Close

the Cartridge-Slot Cover.

The machine starts the HEAD WASH. (It takes

about one hour.)

4)

5)

6)

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments