manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes, Page: 166 / 288

Share
Download
Roland Advanced Jet AJ-1000 Service Notes Download Page 166

4-19

M a c h i n e   g o e s   i n t o   F i r m w a r e   U p g r a d e   m o d e

automatically.

When upgrade is completed, sub power sw will be turned

off automatically.

8

DATA ERROR

FORMAT ERROR

DEVICE ERROR

WRITE ERROR

DEVICE ERROR

WRITE ERROR

DEVICE ERROR

WRITE ERROR

*AJ-SERIES  V1.00

  >             %

ERASING

>              %  

WRITING

<              % 

VERIFYING

<              %

COMPLETE

NG

NG

NG

NG

9

[F/W installation when the Main Board is replaced]

Turn on the Main power SW again while pressing [      ],

[      ] and [      ] keys.

Press [ENTER] key . The machine will be ready to receive

the firmware.

Send the firmware using the Peck3.

10

 [     ], [     ], [     ] + MAIN POWER ON

UPDATE FIRMWARE?

WAITING

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments