manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Service Notes

The Roland Advanced Jet AJ-1000, a cutting-edge printing solution for professionals, now comes with comprehensive Service Notes and user manuals available for download absolutely free. Easily access these essential resources from our website, offering detailed instructions and troubleshooting tips to optimize your printing experience with the AJ-1000.

Share
Download
background image

0110

Input value from Linear
Encoder is not changed
when Linear Encoder is
setup the origin.
When Motor stops during
printing, Motor does not
complete the movement
which is supposed to be
done.

Confirm whether Encoder Scale is between the slit of Encoder Module
in a whole width of the machine
Check Cable connection between Linear Encoder Board and Print
Carriage Board
Confirm connection between Wire and Head Carriage
Linear Encoder replacement
Scan Motor replacement
Main Board replacement

0120

There is a problem with
Thermistor for Pre-Heater
F.

Check Cable connection around Thermistor
Thermistor replacement

0121

There is a problem with
thermistor for Pre-Heater
R.

Check Cable connection around Thermistor
Thermistor replacement

0125

Heater is unusually hot.
Pre-Heater F temperature
has reached 60°C and
above.

Check Heater
Check Thermostat
Check Thermistor

0126

Heater is unusually hot.
Pre-Heater F temperature
has reached 60°C and
above.

Check Heater
Check Thermostat
Check Thermistor

0130

There is a problem with
Thermistor for Print
Heater.

Check Cable connection around Thermistor
Thermistor replacement

0135

Heater is unusually hot.
Print Heater temperature
has reached 60°C and
above.

Check Heater
Check Thermostat
Check Thermistor

0140

There is a problem with
Thermistor for dryer (2
lines/upper).

Check Cable connection around Thermistor
Thermistor replacement

0141

There is a problem with
Thermistor for dryer (2
lines/middle).

Check Cable connection around Thermistor
Thermistor replacement

0142

There is a problem with
Thermistor for dryer (2
lines/lower).

Check Cable connection around Thermistor
Thermistor replacement

0145

Heater is unusually hot.
Dryer (2 lines/upper)
temperature has reached
80°C and above.

Check Heater
Check Thermostat
Check Thermistor

0146

Heater is unusually hot.
Dryer (2 lines/middle)
temperature has reached
80°C and above.

Check Heater
Check Thermostat
Check Thermistor

0147

Heater is unusually hot.
Dryer (2 lines/lower)
temperature has reached
80°C and above.

Check Heater
Check Thermostat
Check Thermistor

0150

Even though the machine
carries out the regular
movement, the output of
Slider Sensor does not
reach the expected value.

Check Cable connection of Servo Board
Check Cable connection of Junction Board
Slider Motor replacement
Slider Sensor replacement
Wiring or Flexible Cable replacement
Servo Board replacement

0151

Even though the machine
carries out the regular
movement, the output of
Head Rise and Fall
Sensor does not reach the
expected value.

Check Cable connection of Servo Board
Check Cable connection of Junction Board
Head Rise and Fall Motor replacement
Head Rise and Fall Sensor replacement
Wiring or Flexible Cable replacement
Servo Board replacement

0152

Even though the machine
carries out the regular
movement, the output of
Wiper Sensor does not
reach the expected value.

Check Cable connection of Servo Board
Check Cable connection of Junction Board
Wiper Motor replacement
Wiper Sensor replacement
Wiring or Flexible Cable replacement
Servo Board replacement

Slider Motor has a problem.
Slider Sensor has a problem.
Wiring or Flexible Cable has short circuitted
or cut-line.
Servo Board has a problem.

Head Rise and Fall Motor has a problem.
Head Rise and Fall Sensor has a problem.
Wiring or Flexible Cable has short circuitted
or cut-line.
Servo Board has a problem.

Wiper Motor has a problem.
Wiper Sensor has a problem.
Wiring or Flexible Cable has short circuitted
or cut-line.
Servo Board has a problem.

Device has a problem.
Thermistor Cable has short circuited or cut-
line.
Device has a problem.
Thermistor Cable has short circuited or cut-
line.

Heater Cable connection has a problem.
Thermostat has a problem (not working).
Thermistor has a problem.

Heater Cable connection has a problem.
Thermostat has a problem (not working).
Thermistor has a problem.

6-12

Read error of Linear Encoder.
Read error of Encoder on Scan Motor side.
Wire is not fixed to Head Carriage firmly.

Device has a problem.
Thermistor Cable has short circuited or cut-
line.
Device has a problem.
Thermistor Cable has short circuited or cut-
line.

Heater Cable connection has a problem.
Thermostat has a problem (not working).
Thermistor has a problem.

Heater Cable connection has a problem.
Thermostat has a problem (not working).
Thermistor has a problem.

Device has a problem.
Thermistor Cable has short circuited or cut-
line.

Heater Cable connection has a problem.
Thermostat has a problem (not working).
Thermistor has a problem.

Device has a problem.
Thermistor Cable has short circuited or cut-
line.

Heater Cable connection has a problem.
Thermostat has a problem (not working).
Thermistor has a problem.

Summary of Contents for Advanced Jet AJ-1000

































































































































































































































































































Reviews:

No comments

Related manuals for Advanced Jet AJ-1000

Eaton Power Defense PD3 Mounting And Operating Instructions preview
Power Defense PD3
Brand: Eaton Pages: 4
3Doodler Flow User Manual preview
Flow
Brand: 3Doodler Pages: 8
MakerBot Replicator Mini+ Quick Start Manual preview
Replicator Mini+
Brand: MakerBot Pages: 2
MakerBot Replicator Mini Compact Reference Manual preview
Replicator Mini Compact
Brand: MakerBot Pages: 38
MakerBot Replicator 2 Quick Start Manual preview
Replicator 2
Brand: MakerBot Pages: 14
SainSmart Prusa i3 Troubleshooting Manual preview
Prusa i3
Brand: SainSmart Pages: 13
Xerox CX Visual Reference Manual preview
CX
Brand: Xerox Pages: 12
Oce COLOR SYSTEM 110 Operator'S Manual preview
COLOR SYSTEM 110
Brand: Oce Pages: 392
Oki C6150dn Material Safety Data Sheet preview
C6150dn
Brand: Oki Pages: 48
Oki C5100n Installation Instructions Manual preview
C5100n
Brand: Oki Pages: 20
Oki B2500 MFP Guía Del Usuario preview
B2500 MFP
Brand: Oki Pages: 42
Oki B2500 MFP Setup Manual preview
B2500 MFP
Brand: Oki Pages: 2
Oki C810n Accessory Installation Manual preview
C810n
Brand: Oki Pages: 8
Oki B 4600n Installation And Training Module preview
B 4600n
Brand: Oki Pages: 13
Oce CS9065 Features & Specifications preview
CS9065
Brand: Oce Pages: 2
Oki MB460MFP Guía Del Usuario preview
MB460MFP
Brand: Oki Pages: 193
Datamax ST-3210 Programmer'S Manual preview
ST-3210
Brand: Datamax Pages: 26
Canon imageRUNNER ADVANCE C5255 Instruction Manual preview
imageRUNNER ADVANCE C5255
Brand: Canon Pages: 64

Brands by name

Popular brands

Load more brands