5-7
4
Check if Adapter Screws are tightened up firmly by hand.
There are 30 checking points.
12 Adapter Screws for Supply Pumps.
12 Adapter Screws for Pressure Pumps.
6 Adapter Screws for Heads.
If you find an Adapter Screw that is not tightened up
enough, tighten it up.
<Head Carrige Part>
[MENU] key
[ ], [ ], [ ] + POWER ON
MENU
SERVICE MENU
3
Turn on Sub Power SW while pressing the Left, Right and
Down keys to enter Service Mode.
Note that air could go into the ink line if you loose
Adadper Screw too much.
<Pressure Pump Part>
Summary of Contents for Advanced Jet AJ-1000
