Remote Control Commands
R&S
®
SMF100A
428
Operating Manual 1167.2319.02 ─ 12
Return values:
<Points>
integer
Range:
10 to 1000
*RST:
0
Example:
SENS:POW:SWE:TIME:REF:DATA:POIN?
Example:
queries the number of points from the reference curve in time
mode.
Usage:
Query only
Options:
R&S SMF-K28
:SENSe[:POWer]:SWEep:TIME:REFerence:DATA:XVALues
<XValues>
Sets or queries the x values of the two reference points, i.e. "Time X (Point A)" and
"Time X (Point B)" in "Time" measurement.
Parameters:
<XValues>
string
Example:
SENSe:POW:SWE:TIME:REF:DATA:XVAL 5,45
Example:
sets the x value of reference "Point A" to 5 µs, and the value of
"Point B" to 45 µs.
Options:
R&S SMF-K28
Manual operation:
See
" Define Reference - Trace Power Analysis "
:SENSe[:POWer]:SWEep:TIME:REFerence:DATA:YVALues
<YValues>
Sets or queries the y values of the two reference points, i.e. "Power Y (Point A)" and
"Power Y (Point B)" in "Time" measurement.
Parameters:
<YValues>
string
Example:
SENSe:POW:SWE:TIME:REF:DATA:YVAL -30,10
Example:
sets the y value of reference "Point A" to -30 dBm, and the value
of "Point B" to 10 dBm.
Options:
R&S SMF-K28
Manual operation:
See
" Define Reference - Trace Power Analysis "
:SENSe<ch>[:POWer]:SWEep:TIME[:SENSor]:SFRequency
<SFrequency>
Defines the separate frequency used for power vs. time measurement.
Power Sensor Measurement Subsystems
