Rohde & Schwarz SMF-B1, Operating Manual

Page: 114 / 653

Instrument Function
R&S
®
SMF100A
99 Operating Manual 1167.2319.02 ─ 12
see Chapter 5.3.5.1, "Overview" , on page 159
●
Reference Oscillator
see
Chapter 5.3.4, "Reference Oscillator" , on page 155
The RF level control is configured in the "Level Control" function block:
●
RF Level
see
Chapter 5.4.1, "Overview of RF Level" , on page 179
●
RF Level Sweep
see
Chapter 5.4.4, "RF Level Sweep" , on page 184
●
ALC
see
Chapter 5.4.5, "Automatic Level Control - ALC" , on page 192
●
Power Sensors
see
Chapter 5.4.6, "Power Sensors" , on page 195
●
User Correction
see
Chapter 5.4.7, "User Correction" , on page 245
The analog and external digital modulations are activated in the "Modulation" function
block:
●
Amplitude Modulation
see
Chapter 5.5.2, "Amplitude Modulation (AM)" , on page 257
●
Frequency Modulation
see
Chapter 5.5.3, "Frequency Modulation (FM)" , on page 259
●
Phase Modulation
see
Chapter 5.5.4, "Phase Modulation (PhiM)" , on page 262
●
Digital Modulation
see
Chapter 5.5.5, "Digital Modulation" , on page 265
●
Pulse Modulation
see
Chapter 5.5.6, "Pulse Modulation (PM)" , on page 267
The internal LF generators, the LF frequency sweep, and the noise generator are con-
figured in the "LF Gen./Noise" function block:
●
LF Gen./Noise
see
Chapter 5.6.1, "LF Gen./Noise" , on page 274
●
LF Frequency Sweep
see
Chapter 5.6.1.3, "LF Frequency Sweep" , on page 278
●
The LF output is configured in the "LF Output" block, see Chapter 5.6.2, "LF Out-
put" , on page 286.
●
The pulse generation is configured in the "Pulse Gen." block, see Chapter 5.6.3,
"Pulse Generator" , on page 295
●
The attenuator is configured in the "Attenuator" block, see Chapter 5.7, "Attenua-
tor" , on page 303
Overview of Instrument Functions