Rohde & Schwarz SMF-B1, Operating Manual

Page: 475 / 653

Remote Control Commands
R&S
®
SMF100A
460 Operating Manual 1167.2319.02 ─ 12
Example: CORR:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into user correction lists.
CORR:DEXC:AFIL:SEL '/var/user/import_ucor.csv'
selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL '/var/user/import_ucor_imp'
selects that the ASCII file
ucor.csv
is imported into user cor-
rection list
ucor_imp
.
Manual operation: See " Destination / Source - User Correction " on page 250
[:SOURce<hw>]:CORRection:CSET[:SELect] <Filename>
Selects or creates a file for the user correction data.
If the file does not exist, the instrument automatically creates a new file with the name
you assigned. Note the predefined file extensions under
Chapter 4.7.2.1, "Extensions
for User Files" , on page 95.
To determine the file location (directory/path) you can either enter it with the command
directly, or use the command
MMEMory:CDIR
.
To activate level correction use the command
[:SOURce<hw>]:CORRection[:
STATe]
.
Parameters:
<Filename> <table name>
Example: CORR:CSET '/var/user/ucor1'
selects the table
ucor1
.
CORR ON
activates level correction. Correction is performed using the
table
ucor1
.
Manual operation: See " User Cor. Data - User Correction " on page 246
[:SOURce<hw>]:CORRection:MEASure
The command triggers the external measurement of the user correction of the level
according to the user defined frequencies.
Example: SOUR:CORR:MEAS
triggers the external measurement of the user correction of the
level according to the user defined frequencies.
Usage: Event
Manual operation: See " Measure – User Correction " on page 246
[:SOURce<hw>]:CORRection:PMETer:TYPE <Type>
The command selects the power meter used for user correction.
SOURce Subsystem