Rohde & Schwarz SMF-B1, Operating Manual, Page: 435 / 653

Remote Control Commands
R&S
®
SMF100A
420 Operating Manual 1167.2319.02 ─ 12
Example: SENS2:SWE:POW:OFFS -5dB
defines a level offset of -5 dB.
SENS2:SWE:POW:OFFS:STAT ON
activates that the specified level offset is taken into account.
Options: Option R&S SMF-K28
Manual operation: See " Level Offset - Power Analysis " on page 228
:SENSe<ch>[:POWer]:SWEep:POWer[:SENSor]:OFFSet:STATe <State>
Activates a level offset at the sensor input. Define the appropriate value with the com-
mand
:SENSe<ch>[:POWer]:SWEep:POWer[:SENSor]:OFFSet
on page 419.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example:
SENS2:SWE:POW:OFFS:STAT ON
activates the specified level offset.
Options: Option R&S SMF-K28
Manual operation: See " Level Offset State- Power Analysis " on page 228
:SENSe<ch>[:POWer]:SWEep:POWer[:SENSor]:SFRequency <SFRequency>
Defines the separate frequency used for power vs. power measurement.
Parameters:
<SFRequency> float
Range:
0 to 1E12
Increment: 1
*RST:
1E6
Example: SENS1:SWE:POW:SENS:SFR 2GHz
'the measurement is performed at 2 GHz
Manual operation: See " Use Separate Frequency- Power Analysis " on page 228
:SENSe<ch>[:POWer]:SWEep:POWer[:SENSor]:SFRequency:STATe <State>
Activates the use of a different frequency for the power measurement.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: SENS1:SWE:POW:SENS:SFR:STAT ON
activates the use of a separate frequency than the generator fre-
quency for power analysis
Manual operation: See " Use Separate Frequency- Power Analysis " on page 228
Power Sensor Measurement Subsystems