General Instrument Settings and Instrument Setup
R&S
®
SGU100A
95
User Manual 1176.7726.02 ─ 09
The settings of this dialog are not accessible over remote control (e.g. SCPI com-
mands).
Change User Password
The user name and password are required for remote access to the instrument via
VNC, FTP or SAMBA.
Note:
It is highly recommended to change the default user password before connect-
ing the instrument to the network.
User Name ← Change User Password
Indicates the user name used for access to the Linux operating system and valid for
VNC, FTP and SAMBA access.
Old Password ← Change User Password
Enter the currently used user password. The default password is "instrument".
New Password ← Change User Password
Enter the new user password.
Confirm Password ← Change User Password
Enter the new password for conformation.
The new password is only valid after the "Change Password" button is pressed.
Change Password ← Change User Password
Changes the password accordingly.
Change Security Password
Note:
It is highly recommended to change the default security password before con-
necting the instrument to the network.
The security password is, for example, required when changing the status of the USB
and LAN interface.
Old Password ← Change Security Password
Enter the currently used security password. The default password is '123456'.
New Password ← Change Security Password
Enter the new security password. The security password may contain decimal charac-
ters only.
Confirm Password ← Change Security Password
Enter the new password for conformation.
The new password is only valid after the "Change Password" button is pressed.
Change Password ← Change Security Password
Changes the password accordingly.
Security Setting