manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 18 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 18

Preparing for Use

R&S

®

SGU100A

16

User Manual 1176.7726.02 ─ 09

Risk of injury during transportation

The carrying handles at the front and side of the casing are designed to lift or carry the
instrument. Do not apply excessive force to the handles. If a handle is ripped off, the
falling instrument can cause injury.

2.1.3

 

Accessory List

The instrument comes with the following accessories:

●

Power cable

●

Getting started printed manual

2.1.4

 

Placing or Mounting the Instrument

The R&S

 

SGU is designed for use under laboratory conditions, either on a bench top

or in a rack using a rack adapter kit (order number see data sheet).

Bench top operation

If the R&S

 

SGU is operated on a bench top, the surface should be flat. The instrument

can be used in horizontal position, standing on its feet.

Putting into Operation

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments