manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 102 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 102

General Instrument Settings and Instrument Setup

R&S

®

SGU100A

100

User Manual 1176.7726.02 ─ 09

Default Gateway

Displays the IP address of the default gateway. To enter the default gateway manually,
select "Address Mode > Static".

This address identifies the router on the same network as the instrument that is used to
forward traffic to destinations beyond the local network.

It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors may affect the entire network.

Remote command: 

:SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway

 

on page 188

Apply

Applies the network settings to the instrument.

8.8

 

Remote Channels

The "Remote" dialog provides access to the settings for remote control.

► To access this dialog, select "SGMA-GUI > Instrument Name > Setup > Remote".

Visa Resource Strings

Indicates the VISA resource strings used for remote control of the instrument. A sepa-
rate string is provided for remote control via the different interfaces.

Note: 

For background information and description of the syntax of the VISA resource

strings, refer to the description of the corresponding interface in 

Chapter 10.1, "Remote

Control Interfaces and Protocols"

, 

on page 113.

Remote command: 

:SYSTem:COMMunicate:HISLip:RESource?

 

on page 188

:SYSTem:COMMunicate:NETWork:RESource?

 

on page 188

:SYSTem:COMMunicate:SOCKet:RESource?

 

on page 189

Remote Channels

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments