manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 106 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 106

Performing Configuration Tasks

R&S

®

SGU100A

104

User Manual 1176.7726.02 ─ 09

9

 

Performing Configuration Tasks

This section provides a general explanation on how to operate the instrument manually
via the R&S SGMA-GUI software.

We assume, that the R&S

 

SGU is connected to a remote PC. The R&S SGMA-GUI

software has to be installed on this remote PC and the instrument has to be added to
the list of "Available Instruments".

For information on how to fulfill these requirements, refer to:

●

Chapter 2.3.2.1, "Connecting the Instrument to the Network"

, 

on page 22

●

Chapter 2.3.1, "Installing the R&S SGMA-GUI Software"

, 

on page 21

●

Chapter 2.3.2.3, "Automatically Adding Instruments to the SGMA-GUI "

,

on page 25

9.1

 

How to Generate I/Q Signals with an R&S SGS and an
R&S SGU Upconverter

Options R&S SGS-B112V and R&S SGU-B120V/-B140V are required for the I/Q mod-
ulation.

To generate an I/Q modulated signal with higher frequency

In this example, the R&S SGU acts as an extension to the R&S

 

SGU extending its fre-

quency range to 40

 

GHz.

The 

Figure 9-1

 shows an example of the test setup.

How to Generate I/Q Signals with an R&S SGS and an R&S SGU Upconverter

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments