Rohde & Schwarz SGU100A, User Manual, Page: 179 / 236

Remote Control Commands
R&S
®
SGU100A
177 User Manual 1176.7726.02 ─ 09
[:SOURce]:POWer:LIMit[:AMPLitude] <Amplitude>
Sets the upper limit of the RF signal power.
The value is not affected by an instrument preset and
*RST
function. This parameter is
influenced only by the factory preset (
SYST:FPR
) and its factory value is equal to the
upper limit.
Parameters:
<Amplitude> float
Range:
-300 to 30
Increment: 0.01
Default unit: dBm
Manual operation: See "Limit" on page 76
[:SOURce]:POWer:PEP?
Queries the RF signal's peak envelope power at the DUT.
Return values:
<PEP> float
Range:
-120 to 25
Increment: 0.01
*RST:
-10
Example: see Chapter 11.1.3, "Advanced Task for Optimizing Perform-
ance" , on page 142
Usage: Query only
Manual operation: See "PEP" on page 60
[:SOURce]:POWer:POWer <Power>
Sets the level at the RF output connector.
This value does not consider a specified offset. The command
[:SOURce]:POWer[:
LEVel][:IMMediate]:OFFSet
sets the level of the "Level" display, that means the
level containing offset.
Parameters:
<Power> float
Range:
-120 to 25
Increment: 0.01
*RST:
-10
Example: POW:POW 15
sets the RF level at output to 15 dBm.
Manual operation: See "Level/Level Offset" on page 60
SOURce:POWer Subsystem