Rohde & Schwarz SGU100A User Manual Download Page 37

Page: 37 / 236

First Steps with the Instrument

R&S

SGU100A

User Manual 1176.7726.02 ─ 09

Tip:

Instrument does not appear in the extension dialog. If the R&S SGU is not

automatically shown in this dialog, press "Scan > Start" to find the instrument.

8. Select the R&S SGU from the list and set "Available Instruments > Select > On" to

enable it as an extension.

A green status indicator "Connected" indicates the successfully established remote
connection between the R&S SGS ant the R&S SGU.
The R&S

SGMA-GUI indicates the extended frequency range of the R&S SGS and

the activated extension mode.

9. Select "Test Signal Connections > Test" to trigger a check of all required signal

connections.

R&S SGU as an Extension to the R&S SGS

Summary of Contents for SGU100A













































































































































































































































Search results

Summary of Contents for SGU100A

Reviews:

Rohde & Schwarz SGU100A, User Manual, Page: 37 / 236

Search results

Summary of Contents for SGU100A

Reviews: