manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 57 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 57

Understanding the R&S SGMA-GUI Software

R&S

®

SGU100A

55

User Manual 1176.7726.02 ─ 09

Software

Displays information on:

"Package"

Installed software packages.

"Version"

Release of the software package.

Show Open Source Acknowledgments

Accesses the list of the used open source software packages and the corresponding
verbatim license texts.

Versions

Shows the installed software platform and its version.

6.1.2.4

 

Reset SGMA-GUI

Resets R&S

 

SGMA-GUI to its factory preset settings.

The connected instruments are not affected by this preset.
To preset one specific instrument to its factory preset settings, select "SGMA-GUI >
Instrument Name > Setup > Factory Preset". Refer to 

Chapter 8.9, "Factory Preset"

,

on page 101 for an overview of the settings affected by this function.

6.1.2.5

 

Remote

Access: "SGMA-GUI > Setup > Remote".

SCPI Port

Sets the port number of the LAN interface for remote control with TCP/IP socket proto-
col.

This allows you to set different port numbers if you want to control different software,
e.g. R&S

 

SGMA-GUI and R&S

 

WinIQSIM2, from the same application.

Operating Menu and Toolbar

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments