Rohde & Schwarz SGU100A, User Manual, Page: 173 / 236

Remote Control Commands
R&S
®
SGU100A
171 User Manual 1176.7726.02 ─ 09
Parameters:
<IqRatio> float
Range:
-1 to 1
Increment: 1E-3
*RST:
0
Example: See Chapter 11.1.2, "Generating an I/Q Modulated Signal" ,
on page 140.
Options: R&S SGU-B120V/-140V
Manual operation: See "Gain Imbalance" on page 84
[:SOURce]:IQ:IMPairment:LEAKage:I <I>
[:SOURce]:IQ:IMPairment:LEAKage:Q <Q>
Sets the carrier leakage amplitude for the I-signal/ Q-signal component.
Parameters:
<Q> float
Range:
-5 to 5
Increment: 0.01
*RST:
0
Default unit: PCT
Example: See Chapter 11.1.2, "Generating an I/Q Modulated Signal" ,
on page 140.
Options: R&S SGU-B120V/-B140V
Manual operation: See "Offset" on page 83
[:SOURce]:IQ:IMPairment:QUADrature[:ANGLe] <Angle>
Sets the quadrature offset for the digital I/Q signal.
Parameters:
<Angle> float
Range:
-8 to 8
Increment: 0.01
*RST:
0
Default unit: DEG
Example: See Chapter 11.1.2, "Generating an I/Q Modulated Signal" ,
on page 140.
Options: R&S SGU-B120V/-B140V
Manual operation: See "Quadrature Offset" on page 84
SOURce:IQ Subsystem