Home
/
Rohde & Schwarz
/
SGU100A
/
User Manual

Rohde & Schwarz SGU100A, User Manual, Page: 111 / 236

Share

Page: 111 / 236

Rohde & Schwarz SGU100A User Manual Download Page 111

Performing Configuration Tasks

R&S

®

SGU100A

109

User Manual 1176.7726.02 ─ 09

On the front panel, the ready state is indicated by the green [POWER ON /STAND
BY] button.

To switch all connected instruments to standby state and close the R&S SGMA-
GUI

► In the R&S

SGMA-GUI main panel, select "File > Shut down instruments and exit".

The R&S

SGMA-GUI quits and switches the connected instruments to standby

state.

For description on how to terminate work and shut down the instrument regularly, refer
to

Chapter 2.1.5, "Switching the Instrument On and Off"

9.4

How to Use Computer Names

If there is a name server in the network, alternatively to the IP address each PC or
instrument connected in a LAN can be accessed via an unambiguous computer name.
Each instrument is delivered with an assigned computer name, but this name can be
changed.

For instruction on how to find out the default computer name, refer to

"Finding Out the Default Hostname of the Instrument"

To query and change a computer name

To avoid violations and to make use of the easy identification provided by the computer
name, it is recommended to keep the default hostname unchanged.

1. Open "SGMA-GUI > Instrument Name > Setup > Network Settings" dialog.

The computer name is displayed under "Hostname".

2. Select "SGMA-GUI > Instrument Name > Setup > Protection" and enable the "Pro-

tection Level 1".

The parameter "Hostname" in the "Network Settings" dialog is now enabled for
configuration.

3. Change the "Hostname".

4. Press the [POWER ON /STAND BY] key to restart the instrument.

Note:

The "Factory Preset" function restores the factory value of the parameter

"Hostname".

How to Use Computer Names

«
...
109
110
111
112
113
...
»

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments