First Steps with the Instrument
R&S
®
SGU100A
38
User Manual 1176.7726.02 ─ 09
The [POWER ON/STANDBY] key has to be
green
and not blinking.
3. Press the [ID] key on the front panel the R&S SGU (only required if the compo-
nents are connected via a company network).
4. On the connected remote PC, start the R&S SGMA-GUI software application.
The main panel of the application and the configure instruments dialog open. The
R&S SGU is added automatically to the instruments list and to the main panel of
the R&S SGMA-GUI software.
The main panel provides a quick access to the main settings of the configured and
activated instruments. The display shows one row per instrument with the instru-
ment specific settings. The rows comprise the instrument, the connection state, the
used frequency and power level and the state of the RF output and the modulator.
5. In the R&S SGMA-GUI main panel, the green indicator in front of the instrument's
name confirms that there is a connection between the instrument and the remote
PC and that the instrument is recognized by the software.
6. In the R&S SGMA-GUI main panel, select the row corresponding to the instrument
to be configured and select "Instrument Name > Preset" to restore the predefined
instrument's settings.
7. Select "SGMA-GUI > R&S SGU > Freq = 15 GHz", "Lev = -10 dBm", "RF > On".
R&S SGU as a Standalone Upconverter