manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 94 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 94

General Instrument Settings and Instrument Setup

R&S

®

SGU100A

92

User Manual 1176.7726.02 ─ 09

Software options purchased at a later stage can be activated with a keycode. The acti-
vation code is supplied with the software option. An instruction on how to install options
is described in the service manual. Most hardware options need to be installed at an
authorized Rohde

 

&

 

Schwarz service center.

Software

Shows the software/firmware version and the version of the software platform.

Note: 

Your instrument is delivered with the latest firmware version available. Firmware

updates and the Release Notes describing the improvements and modifications are
provided on the Internet at the download site of the instrument's home page. This
home page always offers the latest information on your instrument, e.g. also on
changes of the firmware update procedure.

Hardware / Software/WinIQSIM

The tables in the sections "Hardware" and "Software" list the installed hardware and
software options.

"Option"

Short name of the option

"Designation"

Name of the option

"Licenses"

Number of licenses

"Expiration Date"

For regular options, "Permanent" is indicated in this column. Some
options are available as trial versions. This column shows their expi-
ration date. After this date, the option is no longer available on the
instrument.

Loaded Modules

Section "Loaded Modules" is provided for service purposes. It lists all loaded software
modules with their versions and offers a short description of each module.

Show Open Source Acknowledgments

Accesses the list of the used open source software packages and the corresponding
verbatim license texts.

8.3

 

Install SW-Options

Newly purchased software options are enabled in the "Install SW-Option" dialog. They
are ready to operate after they are enabled by a key code supplied with the option.

Only if the instrument is equipped with an older firmware version, a firmware update
before enabling the software option may be required. The information on the valid firm-
ware versions for the purchased software option is provided together with the option.

Install SW-Options

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments