manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 41 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 41

First Steps with the Instrument

R&S

®

SGU100A

39

User Manual 1176.7726.02 ─ 09

8. Select "SGMA-GUI > Instrument Name >Ext. Local Oscillator". Read the required

frequency and level values for the LO.

9. Change the settings of the LO to the required values.

10. Select "SGMA-GUI > Instrument Name > Ext. Local Oscillator > Confirm External

LO Settings" to apply the changes.

The 15 GHz signal is output at the [LO OUT] connector at the rear panel of the
R&S

 

SGU.

Identifying a specific instrument

If several instruments are active in the R&S SGMA-GUI, use one of the device identifi-
cation functions to identify a specific device:

●

Select "SGMA-GUI > Instrument Name > Setup > Remote > Remote Channels >
Device Identify". The green [LAN] LED on the front panel of the instrument blinks.

●

Press the [ID] key on the instrument's front panel. The "Edit Instrument" dialog of
the respective instrument opens.

R&S SGU as a Standalone Upconverter

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments