manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 21 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 21

Preparing for Use

R&S

®

SGU100A

19

User Manual 1176.7726.02 ─ 09

Risk of losing data

If you switch off the running instrument using the rear panel switch or by disconnecting
the power cord, the instrument loses its current settings.
Always press the [POWER ON/STANDBY] key first to shut down the application prop-
erly.

1. Press the [POWER ON /STAND BY] key to save the current setup, shut down the

operating system and set the instrument to standby state.

The [POWER ON /STAND BY] LED must be orange.

Tip: 

If the instrument is operated manually via the R&S SGMA-GUI, select "SGMA-

GUI > Instrument Name > Setup > Standby".

2. To turn the power off, press the main power switch to position 0 (Off).

None of the front-panel LEDs should be on.

2.1.6

 

Function Check

The instrument automatically monitors the main functions when it is switched on and
monitors them continuously during operation.

A detected fault is indicated by an "Error" message displayed in the info line of the
R&S SGMA-GUI together with a brief error description. For an in-depth identification of
the error, press the "SGMA-GUI > Info" button. In response, a description of the errors
is displayed. For more information, refer to the "Error Messages" section in the user
manual.

2.1.7

 

Default Settings

When the instrument is switched on, it is not the preset state that is active, but rather
the instrument state that was set before the instrument was switched off. It is recom-
mended that you use the "SGMA-GUI > Instrument > Preset" function to return the
instrument to its defined preset state every time a new configuration is required or the
current setup is no longer relevant.

The R&S

 

SGU offers a two-stage preset concept:

●

Preset the instrument to a predefined state
The "SGMA-GUI > Instrument Name > Preset" function calls up a defined instru-
ment setup. All parameters and switching states are preset (also these of inactive
operating modes). The default instrument settings provide a reproducible initial
basis for all other settings. However, functions that concern the integration of the
instrument into a measurement setup are not changed.

●

Preset the instrument to its factory settings

Putting into Operation

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments