Rohde & Schwarz SGU100A, User Manual, Page: 76 / 236

Upconverter Settings
R&S
®
SGU100A
74 User Manual 1176.7726.02 ─ 09
Configuring RF level
► To change the RF level of the selected instrument, perform one of the following:
a) Select "SGMA-GUI main panel > Level" and enter the desired value.
b) Select "SGMA-GUI > Instrument Name > Level > RF Level > Level" and enter
the desired value.
You have to confirm the changes of the RF level in the External Local Oscillator
Settings menu for them to be applied to the signal.
7.2.1 RF Level
► To access the RF level settings, select "SGMA-GUI > Instrument Name > Level >
RF Level".
This dialog comprises settings like the RF level and level limit.
Level/Level Offset
Sets the RF level at the RF output connector of the selected instrument.
If you set a level offset, it will be indicated in the R&S SGMA-GUI main panel by a
change in the name of this parameter from "Level" to "Level Offset".
Note: The SCPI command
[:SOURce]:POWer[:LEVel][:IMMediate][:
AMPLitude]
sets the level of the "Level" display, that means the level containing off-
set while
[:SOURce]:POWer:POWer
sets the level at the RF output connector.
Level and Power-On Settings