manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 63 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 63

Understanding the R&S SGMA-GUI Software

R&S

®

SGU100A

61

User Manual 1176.7726.02 ─ 09

6.4.1

 

Storing and Loading Settings

To proceed work with a particular configuration of the instruments in the R&S SGMA-
GUI, it is useful to save the used settings and load them again later.

How to store and load settings

1. Select "SGMA-GUI main panel > File > Save As".

2. Navigate to the desired directory and enter the filename.

The extension 

*.savrcl

 is applied automatically.

The current settings of the software are saved to the selected file.

3. To load settings from a file, select "SGMA-GUI main panel > File > Open"

4. Navigate to the directory the file is stored in and select the setting file.

The saved settings are loaded to the R&S SGMA-GUI and the main panel of the
software displays the saved instrument's configuration.

6.4.2

 

Handling Instruments in the R&S SGMA-GUI

This section provides information on how to configure and manage instruments in the
R&S

 

SGMA-GUI.

For reference information about all provided settings in the user interface, refer to the
corresponding sections:

●

Chapter 6.1.2.1, "Configure Instruments"

, 

on page 50 and 

Chapter 6.1.2.2, "Add/

Edit Instruments"

, 

on page 52

●

Chapter 6.1.2.3, "Versions/Options Dialog"

, 

on page 54

Chapter 6.1.2.4, "Reset SGMA-GUI"

, 

on page 55

6.4.2.1

 

How to Automatically Add New Instruments to the SGMA-GUI

1. For each new instrument perform the following steps:

a) Connect the instrument to the network.
b) Switch on the instrument.
c) Press the [ID] key on the front panel of the instrument.

2. Start the SGMA-GUI on a computer connected to the same network.

All instruments are added automatically to the main panel of the SGMA-GUI.

6.4.2.2

 

How to Manually Add New Instruments to the SGMA-GUI

1. In the R&S

 

SGMA-GUI main panel, select "Setup > Instruments".

The 

Configure Instruments

 dialog opens.

Working with R&S SGMA-GUI

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments