manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 39 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 39

First Steps with the Instrument

R&S

®

SGU100A

37

User Manual 1176.7726.02 ─ 09

Identifying a specific instrument

If several instruments are active in the R&S SGMA-GUI use one of the device identifi-
cation functions to identify a specific device:

●

Select "SGMA-GUI > Instrument Name > Setup > Remote > Remote Channels >
Device Identify". The green [LAN] LED on the front panel of the instrument blinks.

●

Press the [ID] key on the instrument's front panel. The "Edit Instrument" dialog of
the respective instrument opens.

4.2

 

R&S SGU as a Standalone Upconverter

This section provides an example on how to configure the instrument to convert a con-
tinuous wave (CW) signal. The signal in this example is provided by an incompatible
signal generator (local oscillator).

In the following example, the instrument is manually operated via the R&S SGMA-GUI
software. The R&S

 

SGU in this example is a base unit equipped with the frequency

option R&S

 

SGU-B120.

Configuring the R&S

 

SGU to convert a CW signal

As a prerequisite for this example, the R&S SGMA-GUI software has to be installed on
a remote PC and the local oscillator has to be prepared for use.

Figure 4-2: Example of a setup of the R&S SGU as an upconverter

1. Connect the test equipment as shown in 

Figure 4-2

. Additional connections may be

needed to fulfill the requirements of the connected local oscillator. To find out what
connections are needed refer to its user manual.

2. Switch on the R&S SGU.

R&S SGU as a Standalone Upconverter

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments