Rohde & Schwarz SGU100A, User Manual, Page: 152 / 236

Remote Control Commands
R&S
®
SGU100A
150 User Manual 1176.7726.02 ─ 09
11.4 Preset Commands
The following preset actions are available:
●
Activation of the default state of all internal instrument functions (
*RST
on page 147). Functions that concern the integration of the instrument into a mea-
surement setup are not changed, e.g. TCP/IP address or remote operating mode.
●
Activation of the original state of delivery (factory reset,
:SYSTem:FPReset
on page 150). Only functions that are protected by a password remain unchanged
as well as the passwords themselves.
:SOURce<hw>:PRESet
:SYSTem:PRESet
Triggers an instrument reset. It has the same effect as:
●
The
*RST
command
●
The "SGMA-GUI > Instrument Name > Preset" function
For an overview of the settings affected by the preset function, see Chapter 7.7, "Pre-
set" , on page 87.
Example: SYST:PRES
All instrument settings (also the settings that are not currently
active) are reset to their default values.
Usage: Setting only
:SYSTem:FPReset
The command triggers an instrument reset to the original state of delivery.Only func-
tions that are protected by a password remain unchanged.
The factory preset function resets nearly all instrument settings. In addition to the regu-
lar preset a "Factory Preset" resets also the following values:
●
Power on settings ("Level" dialog)
●
Network settings including hostname ("Setup > Network Setting" dialog)
●
Remote Channel settings ("Setup > Remote Channel" dialog)
For an overview of the settings affected by the factory preset function, see Chapter 8.9,
"Factory Preset" , on page 101.
Example: SYST:FPR
all instrument settings (also those that are not currently active)
are reset to the factory values.
Usage: Event
Manual operation: See "Execute Factory Preset" on page 101
Preset Commands