Rohde & Schwarz SGU100A User Manual Download Page 67

Page: 67 / 236

Understanding the R&S SGMA-GUI Software

R&S

SGU100A

User Manual 1176.7726.02 ─ 09

Field "Edit Instrument > Symbolic Name" displays the name of the instrument as
shown in the R&S SGMA-GUI main panel.

Dialog "Edit Instrument" does not appear

If this dialog does not open, perform the following:

●

Check whether the instrument is correctly connected to the external PC on which
you work with the R&S

SGMA-GUI.

●

Check if the instrument is configured in the R&S SGMA-GUI and perform, if neces-
sary, the steps described in

Chapter 6.4.2, "Handling Instruments in the R&S

SGMA-GUI"

on page 61.

●

Select "SGMA-GUI > Setup > Instruments", check the state of the instrument in the
"Configure Instruments > Available Instruments" table and activate it, if disabled.

Working with R&S SGMA-GUI

Summary of Contents for SGU100A













































































































































































































































Search results

Summary of Contents for SGU100A

Reviews:

Rohde & Schwarz SGU100A, User Manual, Page: 67 / 236

Search results

Summary of Contents for SGU100A

Reviews: