manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 95 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 95

General Instrument Settings and Instrument Setup

R&S

®

SGU100A

93

User Manual 1176.7726.02 ─ 09

See:

●

Chapter 9.5, "How to Install a New Firmware Version on the Instrument"

,

on page 110 for information on how to perform firmware update

●

Chapter 9.6, "How to Activate Options"

, 

on page 111 for instruction on how to

install new options

The firmware update is also described in the service manual.

8.4

 

Protection

The "Protection" dialog provides access to the unlocking of protected service functions
(authorized personnel of R&S Service Departments only).

Unlocking of protected service functions

1. Select "SGMA-GUI main panel > Instrument Name > Setup > Protection".

The "Protection" dialog provides access to the unlocking of protected service func-
tions (authorized personnel of R&S Service Departments only).

2. To deactivate the protection, the correct password has to be entered. After the

instrument has been switched on, the protection levels 1 to 4 are automatically
activated.
Enter "Protection Level 1 > Password > 123456".

Protection Level 1 is activated.

Protection Level / Password

"Protection Level 1" can be activated to expand the functionality of the internal adjust-
ment. The password is 123456.

The other protection levels 2 to 4 provide access to protected service functions. Only
the authorized personnel of R&S Service Departments can access these functions.

Protection

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments